Oilpath Product Catalogue

75 P R O D U C T C A T A L O G U E SALES@OILPATH.COM.AU | 08 8277 4933 Oilpath isnot responsible foranyerrorsoromissions,or for the resultsobtained from theuseof the information in this price list.All information in this document is provided“as is”,with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information. RETURN TO INDEX SOURCE FLUID POWER MOTORISED FLOW CONTROLS Source Fluid Power Motorised Flow Controls Source Motorised Flow Control cartridges provide economical and simple electrical control for flows up to 190 lpm. It utilises a 12- or 24-volt DC motor to open or close a rotary spool valve. This rate is changed by providing a 12- or 24-volt signal to either increase or decrease the valve opening. In its simplest form, the control element is a DPDT three position-momentary-contact toggle or rocker switch or two DP momentary-contact push buttons. If a more sophisticated control is desired, the loop can be closed by using a control amplifier and relay circuit in conjunction with feedback from a flow or speed sensor. The valve requires no power to maintain its flow setting. A 12-or24-volt DC is applied only while changing the flow rate and even then shut off to hold flow rate at the desired setting. In the event of a power failure or system shutdown, the system will remain at its current flow setting until power is restored and a command signal is once again supplied. Valve design allows for manual override in cases of electrical failure. The valve is internally protected and will automatically shut down the internal drive when either the full open or full closed position are reached. FEATURES • Internally Protected • Flexible • Requires no power to maintain setting • Efficient • Simple to use • Safe • Economical DESCRIPTION MFC-10 and MFC-16 are cartridge design and fit generic 10-2 and 16-2 cavities respectively. OPERATING SPECIFICATIONS Operating Pressure 3000 psi max Flow Rating (based on 100 psi delta P with valve fully open) Speed in Seconds 0-5 gpm MFC-10-5- (voltage 12 or 24) 3.5 (-03 option) 0-15 gpm MFC-10-15- (voltage 12 or 24) 7.0 (-07 option) 0-20 gpm MFC-16-20- (voltage 12 or 24) 24.0 (-24 option) 0-35 gpm MFC-16-35- (voltage 12 or 24) 48.0 (-48 option) 0-50 gpm MFC-16-50- (voltage 12 or 24) Larger valves (20-2) available on request All Prices available on request Return to index 77 OILPATH HYDRAULICS PTY LTD sales@oilpathhydraulics.com.au Phone 08 82774933